AutomaticATF-I is designed to fill and seal aluminium / lami / plastic tubes at high speeds. The machine is suitable mainly for pharmaceutical, cosmetic and food industry. Machine can be used for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system.

The machine is of fully enclosed construction with a rotary index table and single filling head.

Machine is available in 3 configurations – 1) for aluminium tubes 2) for lami / plastic tubes 3) for alu + lami tubes

 

Construction: Fully enclosed

Operation System: Single Head, Rotary Index Table

Output: 2400 tubes per hour for lami tubes
             3000 tubes per hour for alu tubes

Tube Diameter: Minimum 12 mm   to   maximum 35 mm for alu, maximum 50 mm for lami

Tube Length: Minimum 50 mm   to maximum 220 mm

Tube Loading: Automatic through a tube holding tray (tray – also known as ‘ tube loading hopper ’ – to be manually loaded)

Tube Orientation: Automatic, electronically controlled

Tube Cleaning: By compressed air blow

Product Hopper: S.S. 304, 50 liters capacity. {Water jacket with electrical heating and hot water circulation pump optional}

Product Agitator: Slow speed agitator for stirring of product in hopper as an option

Filling Nozzle: Fixed nozzle, with tube lifting at filling station – to lift up the tube so that nozzle gets inserted inside tube while filling. {Diving nozzle optional}.   NO−TUBE−NO−FILL system incorporated.

Tail Cutting: By suck-back method (to prevent dripping after filling operation)

Dozing Range: a) 3 to 30 ml
                        b) 30 to 100 ml
                        c) 100 to 250 ml

Tube Sealing: By hot air tool for plastic and lami tubes
                     By double fold and crimping tool for aluminium tubes

Batch Code Embossing: In sealing jaws for plastic / lami tubes and in crimping jaws for alu tubes

Trim Waste: Collected in a container on machine

Tube Ejection: Automatic, through a discharge chute for collection